Olight SMINI Baton Cu Limited Edition - Raw Copper

Currently unavailable

Notify on availability
£54.95 / unit(s)
Price incl. VAT, plus delivery
Available delivery methods: Standard UK Mainland delivery, Customer pickup from Plymouth, UK, International Shipping, Delivery to RFD - you pay the transfer fee

The Olight SMINI Baton Cu is a limited edition LED torch for 2016 that is made from Copper and comes in a choice of three finishes; Raw Copper, Black Onyx or Rose Gold.

It has a maximum output of 550 lumens, which is 10% more than the S1, and is powered by one CR123A primary lithium cell which is included, or can use one RCR123 rechargeable lithium-ion battery.

The SMINI Cu offers a cool white output from a Cree XM-L2 LED, and has a maximum beam distance of 110 metres.

Simply press the side mounted button to turn the torch on and then hold the button down to cycle through low, mid, high in turn. The moonlight mode can be accessed directly when the torch is off by pressing and holding down the switch. Instant access to high mode can be achieved by a quick double press when the light it off.

When the torch is switched on a quick triple click of the on/off button activates strobe mode.

The SMINI has a memory function to allow you to activate the light in a particular mode, a strobe mode for personal protection and a lockout mode to prevent accidental activation.

Two timer settings are available; long timer (9 minutes) and short timer (3 minutes). Double clicking the side switch will enter this setting and one blink indicates the 3 minutes mode, and two blinks indicates the 9 minutes mode.

Double click the side switch to change the timer to the opposite setting. After the setting is saved, the light will blink 3 times and then will enter the timer mode. The light will automatically turn off when the timer is over.

Operational Modes:
High: 550 lumens; 1.5 minutes run-time, 300 lumens; 2 hours run-time*
Mid: 60 lumens; 8 hours, 30 minutes run-time
Low: 12 lumens; 64 hours run-time
Moonlight Mode: 0.5 lumens; 30 days run-time
Strobe: 10 Hz

The above parameters are tested to ANSI/NEMA FL1-2009 standards using one lithium metal CR123A 3 V, 1600 mAh non-rechargeable battery.

Please note: *The high setting after 1.5 minutes run-time will decrease to 300 lumens to protect the LED from overheating.