The re-designed Fenix TK32 now delivers an output increase to 1000 lumens and an ultra long beam throw of an impressive 1/4 mile (422m). Four digitally regulated white light outputs offer options to suit the situation at hand whilst the light is conveniently operated by its dual tail switches and is waterproof to the IPX-8 standard for your water resistance needs. A substantial output increase in both red and green colour modes adds greatly to the usefulness of these modes.

Built-in over heat protection kicks in when the TK32 reaches a 65 centigrade internal temperature, reducing light output and greatly extending the life of your TK32 when used for long periods at high brightness.

Fenix TK32 2016 performance:

White light: Turbo: 1000 lumens (1h 50 min accumulated - 422 m beam), High: 350 lumens (4h 45 min - 245m beam), Mid: 100 lumens (15h 25 min - 138m beam), Low: 8 lumens (170h - 40m beam)

Red Light: High: 105 lumens (4h 15 min - 65m beam), Low: 15 lumens (65h - 23m beam)

Green light: High: 165 lumens (5h 30 min - 105m beam), Low: 30 lumens (40h - 45m beam)

Fenix TK32 operation:

Dual Tail Switch
The round tail switch is the tactical on/off switch, and the oval tail switch is the function switch.

ON/OFF
Tap the tactical switch to turn on the light, release and the light will go out. Fully press the tactical switch to lock and activate the light constantly, press once again to unlock and turn off the light.

Output Selection
In White light mode, single-click the function switch to cycle the light through Low→Mid→High→Turbo.

In White light mode, press and hold the function switch for 0.8 seconds to enter Coloured light mode (Red High is default). Single-click the function switch to cycle the light through Red High→Red Low→Green High→Green Low, press and hold the function switch for 0.8 seconds again to return to the memorized white light mode.

With the light off, press the function switch to enter Coloured light mode (Red High is default), release it the light will go out. Press and release the function switch fast to select needed coloured light, simultaneously press the tactical switch to lock the selected coloured light and hold the Coloured light mode.

Note: The light automatically memorizes the previously used brightness level of White Light mode, when it is turned on again.

Model     TK32 2016
Batteries     CR123 x 2 / 18650 x 1
Additional Battery Type     3.7v Li-ion 16340 x 2,
Lamp Type     Cree XP-L white, XQ-E Red and XQ-E Green LEDs
Output/Runtime     Primary Cree XP-L LED. Turbo: 1000 lumens (1 hr 50 mins), High: 350 lumens (4 hrs 45 mins), Mid: 100 lumens (15 hrs 25 mins), Low: 8 lumens (170 hrs)
Strobe/SOS     N/A
Reflector     Smooth
Lens Type     Toughened ultra-clear glass lens with anti-reflective coating
Switch Type     Dual tail cap switches: (mode switch and on - off - momentary switch)
Construction     Made from durable aircraft-grade aluminum
Finish     Premium Type III hard-anodized anti-abrasive finish
Tail Stand     No
Pocket Clip     No
Waterproofing     IPX-8, 2m depth
Dimensions     159 mm (Length) × 25.4 mm (Body Diameter) × 52mm (Head Diameter)
Weight     175-gram weight (excluding batteries)