Standard 1/8"BSP male thread for direct fitting to a flexible fill line or our quick coupler system.

Made from brass to combat the corrosion found inside some of the earlier steel units originally supplied with the Weihrauch HW100 Quick Fill cylinder. This fill probe is also for the Weihrauch HW110.

Complete with spare 'O' rings and silicone grease kit.

Suits the Air Arms S400/410/200 and the new S510.

This is the hose end fitting with 'T' bar slot to locate on the new style fill valve with the 'T' bar retainer on the end.

Also fits early 'New Style' valves without the 'T' bar on the end of the fill valve. (Quite rare)

Fits old style Air Arms S400/410 & S200

These can also be used to make your charging system easier to use with multiple guns. As used at the many airgun clubs and ranges in the Devon area.

Simply attach one of these to your hose then attach one of the S470 Male Snap Connectors onto each of your different probes to make a quick and convenient snap and change system.

When combining several hoses or adaptors, variances in thread size can cause frustration. With our choice of thread adaptors, this problem should be a thing of the past.

**Always ensure that you are connecting comparable pressure vessels together. i.e. 300Bar to 300Bar

When combining several hoses or adaptors, variances in thread size can cause frustration. With our choice of thread adaptors, this problem should be a thing of the past.

**Always ensure that you are connecting compatible pressure vessels together. i.e. 300Bar to 300Bar

When combining several hoses or adaptors, variances in thread size can cause frustration. With our choice of thread adaptors, this problem should be a thing of the past.

**Always ensure that you are connecting compatible pressure vessels together. i.e. 300Bar to 300Bar

Genuine Weihrauch Fill adaptor for Early HW100 Rifles Without the Quick Fill Valve.

Pre-Quick fill. Allows for fitting the detachable receiver to a 232 BAR DIN Female outlet. To use this on a 300 BAR DIN Cylinder you must use a DIN Spacer Ring.

Combined Dust Plug & Cylinder Residual Pressure Test Plug. Fits BEST Fittings QC02 Socket as used on all current Daystate guns.

Compatible with Foster 12FS, 12FSS and 12MS Straight Thru Quick Snap Couplers. Essential to the keep the nasties out of your prized shooting tool, and quickly test your residual cylinder pressure by blanking the system.

To read the residual cylinder pressure, install the plug into the BEST Fittings or compatible fill connector, close the bleed valve on the cylinder and slowly open the cylinder air control valve. The pressure inside the cylinder will be indicated on the cylinder or charging head gauge. Bleed the system after use.

High Quality Stainless Steel, made in the UK.